Rosemount 396R Instruction Manual Download Page 13

Page: 13 / 64

Installation

2.1

First Time Installation

For first time Rosemount 396R installations, using the following guide is recommended:
1.

Retractable Mounting

Choose one (required for all first time installations):

PN 23166-00, 1 in. x 1 in. NPT process connector, 316 SST
PN 23166-01, 1 in. x 1 in. NPT process connector, Titanium

Choose one:

PN 23240-00, 1-1/2 in. ball valve assembly, 316 SST
PN 23765-00, 1-1/4 in. ball valve assembly, 316 SST

Junction Boxes (Optional; Choose either Sensor Head or Remote)

Sensor Head Junction Boxes (used with options -60 or -61 sensor) - Choose one:

PN 23709-00; includes preamplifier

Remote Junction Boxes (used with standard 15 ft. cable length sensor) - Choose one:

PN 23555-00; includes preamplifier

Extension Cables - Choose one:

PN 23646-01, 11 conductor, shielded, prepped
PN 9200273, 11 conductor, shielded, unprepped

For first time Rosemount 396RVP installations, using the following guide is recommended:
1.

Variopol Cable (required for all first time installations)

Choose one: PN 24281-00 -- 15 ft. VP8 Cable

PN 24281-01 -- 25 ft. VP8 Cable

Retractable Mounting

1A. Choose one (required for all first time installations, except as noted):

PN 23166-00 1 in. x 1 in. NPT process connector, 316 SST
PN 23166-01 1 in. x 1 in. NPT process connector, Titanium

Choose one (optional process connector o-rings):

PN 9550220, Kalrez ® O-ring, 2-214
PN 9550099, Viton ® O-ring, 2-214

1b. Choose one:

PN 23240-00 1-1/2 in. ball valve assembly, 316 SST
PN 23765-00 1-1/4 in. ball valve assembly, 316 SST (process connector not needed)

Remote Junction Boxes (Optional)

PN 23555-00 includes preamplifier

Extension cables

Choose one: PN 23646-01, 11 conductor, shielded, prepped

PN 9200273, 11 conductor, shielded, unprepped

Section 2: Installation

Instruction Manual

Installation

LIQ-MAN-396R-396RVP

March 2017

Summary of Contents for 396R

































































Search results

Summary of Contents for 396R

Reviews:

Related manuals for 396R

Brands by name

Popular brands

Rosemount 396R, Instruction Manual

Search results

Summary of Contents for 396R

Reviews:

Related manuals for 396R

Brands by name

Popular brands