manualshive.com logo in svg

Rosemount Analytical SOLU COMP II, Instruction Manual

Share
Download
Rosemount Analytical SOLU COMP II Instruction Manual Download Page 19

11

SECTION 2.0.

INSTALLATION

MODEL SOLU COMP II

SECTION 2.0

INSTALLATION

2.1 UNPACKING AND INSPECTION

2.2 INSTALLATION

Type of Mounting 

Section

Panel

2.2.2

Pipe

2.2.3

Surface

2.2.4

2.1 UNPACKING AND INSPECTION

Inspect the shipping container. If it is damaged, contact the shipper immediately for instructions. Save the box. If
there is no apparent damage, unpack the container. Be sure all items shown on the packing list are present. If items
are missing, notify Rosemount Analytical immediately.

2.2 INSTALLATION

2.2.1 General Information

1.

Although the analyzer is suitable for outdoor use, do not install it in direct sunlight or in areas of extreme tem-
peratures.

2.

Install the analyzer in an area where vibrations and electromagnetic and radio frequency interference are min-
imized or absent.

3.

Keep the analyzer and sensor wiring at least one foot from high voltage conductors. Be sure there is easy
access to the analyzer.

4.

The analyzer is suitable for panel, pipe, or surface mounting. Refer to the table below.

5.

See Section 3.1 for removal of conduit knockouts.

Summary of Contents for SOLU COMP II















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands