Automatic Escalator Deep Cleaning Machine – Rotomac 360
Created by Rosemor International Ltd
Page 11
3.3 Filling fresh water
(see Fig. 5 on page 11)
•
Unlock coupling (29) and separate from
fresh-water tank (30)
•
Draw fresh-water tank forward on shaft
(13) and withdraw from machine
•
Remove lid (32) and fill with a maximum
of 10 litres of fresh water and 1 litre of
cleaning chemical (RC91)
Fig. 5: Fill up with fresh water
Fig. 6: Adjusting seal strip
3.4 Preparations on site
The cleaning date should be co-ordinated with
the maintenance personnel (possibly process
electrician) in charge of the escalator.
The safety manager should also be informed if
necessary.
The operator must plug in the mains cable for
the machine, or a suitable socket must be
shown to him.
The operator must furthermore obtain instruction
on manual control of the escalator or else
ensure that some person familiar with the
workings of the escalator is available near by at
all times.
Each time the fresh-water
tank is being filled, the dirty-
water tank (2) should also be
inspected and emptied if
necessary. See Section 3.14
Emptying the dirty-water
tanks on page 16
Have the escalator switched
off by the relevant specialists
and secured against being
switched on by accident!
Remove escalator key!