background image

750ml  Indiv. Bottle 3 Col.

4

 

Face this cross piece upwards 

 

Step 3

Attaching 

FRONT

 ladders.

Nail the cross pieces under the 5th, 9th and 10th cleat 

starting from the bottom. Nail the top piece flush with 

front of the ladders as shown.

Step 4

Attaching to the wall

Fasten to the wall through the back cross pieces using #8x3 “ screws and 

using a level to make sure rack is mounted square on the wall. Make sure 

back cross piece has    ” dia pilot holes drilled before screwing to wall.

For a professional looking  job you can use a nail set to indent the nail 

heads and wood filler to fill in the nail holes on the front cleats, baseboard 

and crown moulding. Give the part that was filled a light sanding with 180 

grit sandpaper.

3

32

 

 

baseboard attached 

to bottom of rack

 

1

4

  3

 

 

Crown moulding 

attached to top of rack

 

1

2

  1

Apr/23/2012

Toll Free: 1-888-253-6807 

www.RosehillWineCellars.com

6ft Premier Cru

Kit Rack

Summary of Contents for CRU6 750ML1COL

Page 1: ...ent units have been ordered please assemble all boxes by units to ensure that specific unit parts are not intermixed with other units 3 It is highly recommended to drill dia pilot holes on back cross pieces for screws before attaching to wall 3 32 8x3 Assembly Instructions 6Ft Tools Needed Hammer Pneumatic Brad Nailer Power drill Level Power miter saw Preferred pilot drill Nail Set Wood filler Opt...

Page 2: ...tle 3 Col Crown 9 pcs Cross piece 2 1pc Right end ladder 3 4 72 1pc Left end ladder 3 4 72 2pcs Middle ladder 3 4 72 Baseboard Apr 23 2012 Toll Free 1 888 253 6807 www RosehillWineCellars com 6ft Premier Cru Kit Rack ...

Page 3: ...h and 10th cleat starting from the bottom Nail the top piece flush with top of the ladders Step 2 Attaching middle ladders Take the middle ladders making sure the angled cleats are facing front Place each ladder into cross piece slots and nail from the back on all five back cross pieces First cleat is located from the bottom of the ladder 1 4 3 Angled cleats facing front Apr 23 2012 Toll Free 1 88...

Page 4: ...make sure rack is mounted square on the wall Make sure back cross piece has dia pilot holes drilled before screwing to wall For a professional looking job you can use a nail set to indent the nail heads and wood filler to fill in the nail holes on the front cleats baseboard and crown moulding Give the part that was filled a light sanding with 180 grit sandpaper 3 32 baseboard attached to bottom of...

Reviews: