KEYBOARD COMMANDS
ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL
27
Keyboard commands
The following table describes the available keyboard commands.
The <Ctrl> key sequence is a press and release of the left control
key. Commands following <Ctrl> must be entered within 2 seconds.
Command Key
sequence
Description
OSD menu
<Ctrl> F12
Displays on-screen menus
CPU select
<Ctrl> ESC
List of CPUs to select
Select
computer
<Ctrl> nnn where nnn
= computer number
Connects the KVM station to
the selected computer.
Next computer
<Ctrl> +
Selects next sequential CPU
Previous
computer
<Ctrl> -
Selects previous sequential
CPU.
Scan ON
<Ctrl> S
Turns scan mode on
Scan OFF
<Ctrl> X
Turns scan mode off
Display label
<Ctrl> D
Turns CPU label on/off
Logoff
<Ctlr> L
Disconnects from currently
connected computer.
Set mode
<Ctrl> Mnn <Enter>
where nn = mode
value from Table 5.
Alternate way to configure
keyboard and mouse.
Set resolution
<Ctrl> Yn <Enter>
where n = resolution
value from Table 6
Alternate way to set screen
resolution when no video is
present from a CPU..
Screen saver
time
<Ctrl> Vnnn <Enter>
where n = 0 –999 sec.
Alternate way to set screen
saver time.
Null mouse
command
<Ctrl> N
Used to re-sync a PS/2
mouse.
Reset mouse
<Ctrl> O (alpha O)
Resets computer’s mouse.
Reset
command
<Ctrl> R
Resets and enables mouse
and keyboard on currently
selected computer
Max computers
<Ctrl> Pnnn
Total ports used (all units)
Units
<Ctrl> Unn
Number of expansion units.
Width
<Ctrl> Wnn
Number of ports on
expansion units.
Keep
<Ctrl> K
Saves to flash memory.
Table 4. Keyboard commands
