UltraLink E-Series Manual
15
Installing an SFP module
1. Close the latch handle.
2. Push the module into the SFP cage. Make sure the
module is properly oriented. A properly oriented module
should slide easily into the housing.
3. Make sure the SFP module is inserted all the way into
the housing, When it locks in place, you may hear a
“click”. To make sure the SFP module is securely
inserted, pull gently on the module without lowering the
latch handle.
Figure 12. Installing an SFP Module
Removing an SFP Module
1. Pull the latch handle down to unlock the SFP module
from its housing.
WARNING:
Forcing the module from its housing without
unlocking it may damage the module and the cage.
2.Grasp the SFP module by the side walls and carefully
pull the module out of the housing.
Figure 13. Removing an SFP module
Summary of Contents for UltraLink E Series
Page 7: ......