Rose Translator Installation and Operation Manual
31
Dip Switch Configuration
On the bottom panel of the Video Converter / Scaler is a single dip switch. Remove the piece of colored tape to
reveal the dip switch bank.
Figure 67. Dip Switch on the Video Converter and .Scaler
By default, the dip switch is in the
OFF (1)
position. The dip switch should remain in this position during normal
operation.
Dip Switch Description
Position
Factory Reset:
Toggle the dip switch from the
OFF (1)
position to
the
ON
position, then back to the
OFF (1)
position
1
Normal Operation:
Dip switch is in the
OFF (1)
position
Table 1. Dip Switch Configuration
