EN
14
3.2 Adjusting the strap buckles
After prolonged and/or frequent transportation under tension, the long straps may lose tensile force as
they are stretched slightly.
Therefore the case should be disassembled when not in use, or at least the straps in the buckle hooks
should only be hooked in and not put under tension. This allows the straps to relax and return to their
initial length.
If the straps stretch over time, an adjustment option has been provided on the strap buckles with which it
is possible to adapt the strap tension at any time.
To adjust the strap tension, follow the steps below:
1. Loosen the bolts on both sides of the buckle.
2. Position the metal pin within the strap between the
desired holes.
→
Shortening the strap = more tension
→
Lengthening the strap = less tension
3. Tighten the bolts again.
