EN
10
2. Installation
1. Attach the castor/wheel to the case shell.
2. Screw the four horizontal bolts with washers
through the case shell into the castor mount.
4 x
3. Screw the two vertical bolts with washers
through the case shell into the castor mount.
2 x
4. Attach the swivel castor/wheel to the case shell.
5. Insert the four bolts from below through the
castor flange and the case shell, fit the washers
and nuts, then tighten the nuts.
4 x
6. Repeat the assembly of the castors on the second case shell.
