Parts
Instructions For Hanging
Step 1
Push barb up through large hole in bottom of
spider anchor. Turn barb to fit into slot in anchor
pocket.
Place barb into slot and pull remainder of
mono-filament back through anchor.
Fig. 1
Step 2
Push the barb at other end of monofilament
through hole in top of MultiClip.
Fig. 2
Step 3
Turn barb and pull monofilament back through
the MultiClip to capture the barb.
Fig. 3
Step 4
Insert MultiClip into top rail of holder.
Fig. 4
Step 5
For directions on how to use a specific holder to
hang your poster, refer to the appropriate instruc-
tion sheet.
Instruction Sheet
Cable/Cord Spider
TM
Anchor with Monofilament and Barb
Incept-3.17.00
The Spider Anchor is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #00INSMono & Barb
MultiClip
1UP-0100
Monofilament
and Barb 25-0016
Spider Anchor
RAN-BASE-CC
Figure 4
Figure 3
Figure 2
Figure 1
