Parts
Instructions for Hanging
Instruction Sheet
Step 1
Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster.
Fig. 1
Note: For thinner substrates, it may be neces-
sary to staple the edge of the graphic before
inserting into Slim Holder.
Step 2
Slide Slim holder into AnoMulti holder.
Fig. 2
Step 3
Squeeze sides of MultiClip together.
Fig.3
Step 4
Align the bottom rail of the MultiClip with
the top channel of the aluminum holder. Slide
MultiClip into rail.
Fig. 4
Repeat steps 3 & 4
for second MultiClip.
Step 5
Push end caps into place.
Fig. 5
Step 6
Suspend poster.
Fig. 6
Important note:
Please save and reuse the AnoMulti holder,
End caps and MultiClips for future projects.
AnoMulti™
Instructions for Hanging
Incept-7.31.02
Figure 1
Figure 2
The AnoMulti™ and Slim™ are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiSQMC
End Caps
06-5545
MultiClips
1UP-010
1
AnoMulti
12AM300SQ
Figure 6
Figure 5
Figure 3
Figure 4
