Roscoe Medical Twin Stim Plus 3rd Edition, Instruction Manual

Page: 27 / 40

TENSPros
26
Caution:
1) Before proceeding to this step, be sure the device is completely
turned OFF.
2) Insert the lead wires into the lead connectors on top of the device.
Caution:
Do not insert the plug of the patient lead wire into any AC power
supply socket.
8.4 Electrode
8.4.1 Electrode options
The electrodes are disposable and should be routinely replaced when
they start to lose their adhesive nature. If you are unsure of your electrode
adhesive properties, order replacement electrodes. Replacement electrodes
should be re-ordered through or on the advice of your physician to ensure
proper quality. Follow application procedures outlined in electrode packing,
to maintain optimal stimulation and to prevent skin irritation.
8.4.2 Place electrodes on skin
Apply electrodes to the exact site indicated by your physician or therapist,
before applying electrodes, be sure the skin surface over which electrodes
are placed is thoroughly cleaned and dried. Make sure the electrodes are
placed firmly to the skin and make good contact between the skin and the
electrodes. Place the electrodes over the skin; attach them properly,
firmly, and evenly.
1) Before applying the self-adhesive electrodes, it is recommended to wash
8.3 Connect lead wires to device
PLUG
LEAD CONECTOR