Roscoe Medical
InTENSity Twin Stim IV
- 21 -
CAUTION
Always use electrodes with CE mark, or which are legally marketed
in the US under 510(K) procedure.
5.3 Connecting Lead Wires
1) Before proceeding to this step, be sure the device is completely
turned OFF.
2) Insert the lead wires into the output sockets located on the top
of the device.
3) Holding the insulated portion of the connector, push the plug end
of the wire into one of the sockets (see drawing); one or two sets
of wires may be used.
4) This device has two output receptacles controlled by Channel 1 and
Channel 2 at the top of the unit. You may choose to use one channel
with one pair of lead wires or both channels with two pairs of lead
wires. Using both channels gives the user the advantage of stimulat-
ing two different areas at the same time.
Note
: If you use only one Channel, only plug in 1 lead wire
at the top of the unit
Summary of Contents for InTENSity Twin Stim IV
Page 1: ...Twin Stim IV INSTRUCTION MANUAL www roscoemedical com...
Page 43: ......
