Rosco Vision SAFE-T-SCOPE 360, Installation Manual And User'S Manual

Page: 11 / 29

11
Color Description Details
Black Ground
Connect to vehicle ground, such as a clean part of vehicle chassis.
Yellow Battery
Connect to 9-32V constant power. Be sure to fuse connection with 3-
Amp fuse.
Red Ignition Connect to vehicle fuse block at a location that is zero-voltage when
vehicle ignition is off. Be sure to verify this with a multimeter. Fuse
connection with a 3-Amp fuse.
Blue
Reverse Trigger wire for reverse trigger. Requires 12V signal for activation.
Orange Left Flasher Trigger wire for left flasher. Requires 12V signal for activation.
Brown Right Flasher Trigger wire for right flasher. Requires 12V signal for activation.
Purple Navi Gear Out
Output activation trigger. = used to trigger monitor. This wire carries
a 12V signal anytime video is outputed on CVBS (see Video Harness
Detail on previous page).
Green Speed Pulse Optional analog vehicle speed signal input.
Connecting a Monitor
•
Use STSH358 for RCA output.
•
Use STSH357 for 4-pin video output.
•
For information on compatible Rosco brand monitors, see “Optional Hardware/Software/Spare Parts”
section on Page 27.
•
For detailed application note with monitor installation, see section “Application notes” on Page 28.
Once installed, the system must be calibrated for optimal performance.
Calibration can be performed with the assistance of a trained Rosco engineer or by a trained Rosco technician.
Customer calibration requires STSK361 calibration kit and the remote assistance of a trained Rosco engineer.