background image

- 14 -

Storage & Shipment

Before storing the machine for an extended period of time, ensure the following:
•  Fluid bottle has been removed and securely capped
•  Proper cleaning of exterior as described above
•  Proper purging of the heat exchanger as described above
•  Machine is properly boxed or covered to avoid dust build up on internal components
•  If shipping, use original packaging or comparable protection to avoid damaging the machine 
 

in transit

SPECIFICATIONS

Physical
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24.16” (613.8 mm)
Width.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 11.54” (293 mm)
Height  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.40” (289.5 mm)
Dry weight    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   32 lbs (14.5 Kg)
Performance
Operating time     .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . continuous
Warm up time  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-10 minutes
Control and programming
Control options  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DMX, timer remote
DMX channels  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Fluid system
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120v - 4 liters / 240v - 5 liters
Fluid consumption  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.9 liters/hour
Compatible fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V-Hazer fluid ONLY
Connections
DMX    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   5 pin XLR
Remote / Multi-Link     .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   3 pin XLR
AC power  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Fixed power cable
Electrical
AC voltage   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120V / 230V, 50/60Hz
Main fuse (120V US version)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10AT
Main fuse (230V EU version)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5AT
Thermal
Maximum ambient temperature    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   40°C (104°F)
Exterior surface temperature, steady state, at 20°C ambient  . . . . . . . . . . . . . . . . . . . . 40°C (104°F)
Approvals
European EMC: . . . . . . . . . . . . . . . . . . . . . . . . . EN61000-6-3,EN61000-3-2,EN61000-3-3,EN50366
European safety: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  EN 60 335-1
Immunity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN61000-6-1, EN61000-4-2,EN61000-4-3
ETL approvals (cETLus) pending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UL60335-1, CSA-E60335-1
Information in this document is subject to change without notice and does not represent a commitment on 
the part of Rosco Laboratories, Inc.

Summary of Contents for V-Hazer



















Reviews: