Safe-T-Scope
®
Backup Camera System
STSK7360
DIMMER
2.
Dimmer sensor setting
Press the “MODE“ button until OSD menu “PICTURE SETUP“ appears.
Press button to select “DIMMER“ and use to enter selection.
Press the “DAY/NIGHT“ button to switch DAY >> NIGHT >> AUTO >> DAY
* Dimmer is set AUTO from the factory
PICTURE
3.
PICTURE SETUP
Press the “Mode“ button until OSD menu “PICTURE SETUP“ appears.
Press button to select changes and use to adjust value.
* Each factory setting is preset to 50.
LANGUAGE
4.
LANGUAGE DISPLAY SELECTION
Press the “Mode“ button until OSD menu “PICTURE SETUP“ appears
Press button to select changes and use to adjust value.
* Language selection: ENGLISH - FRENCH - GERMAN - ITALIAN - SPANISH
17
SETTINGS
FACTORY SETTINGS
5.
Reset
• Press the “MODE“ button until OSD menu “PICTURE SETUP“ appears.
• Press button to select “RESET“ and use to enter selection.
* All settings are initialized at the factory mode except for the video input. (NTSC/PAL)
INSTALLATION OF U-BRACKET
1. Ensure that the monitor is installed with enough room for heat emission. Install the
monitor stand with enclosed screws and double side adhesive tape as shown in the
above image.
2. Fix the monitor to the monitor stand firmly.
3. Sun Visor should be installed with 4 screws.
18
