Mor-Vision
™
Mirror/Monitor Backup Camera System, Installation User Manual
Mor-Vision
™
Mirror/Monitor Backup Camera System, Installation User Manual
1
2
GENERAL
1. This system is intended for use in automotive applications. Power source
should be an automobile storage battery (12V/24V).
2. Make sure all cables are connected properly. Improper cable connections
may damage the monitor. Remove the cable connection when you do not
intend to use the unit for a long period of time
3. Please install this system according to the instructions in this manual.
4. Connect the system to an ignition switched power source. Connection to
an unswitched battery source will reduce battery life.
WARNING
1. High voltages exist within the monitor. Opening of monitor case is unsafe, and
never necessary for operating purposes.
2. In case of any failure, please turn off the display at once, and notify our
company or the corresponding dealer. The monitor is made up of many
precise electronic components. Any disassembly or modification may lead
to damage and voiding of warranty.
WARNING
1. To prevent electrical shock, DO NOT OPEN THE MONITOR CASE.
There are dangerous voltages inside the monitor. There are no user
serviceable parts inside.
2. Avoid exposing monitor to water, rain, moisture etc. It is NOT waterproof.
Any moisture inside the monitor could cause extensive damage.
3. Do not disassemble the camera or the monitor. This voids the
warranty. Disassembling the camera will compromise the waterproof seal.
STORAGE
1. Do not expose the monitor to excessive heat or cold. The storage
temperature of this device is -5ºF~+158º F, and operating temperature is
+5ºF~+149
º
F.
2. Do not store or operate in humid environments.
