Rosco Miro Cube 4CA, User Manual

Page: 21 / 36

Color Wash Mode
21
The wash timer determines how long it takes for the Braq Cube to
complete an entire color cycle, and, by extension, the rate at which
the colors change. Choose a short time for a rapid wash or a longer
time for a slower wash. To change the Wash Timer, press MENU and
select
“CHANGE WASH TIMER?”
by pressing
OK
. Use the or
keys to select a Wash Time between 15 seconds and 60 minutes (in
15 second intervals).
When set to Color Wash Mode, the Braq Cube is operating as a DMX
master and is sending DMX512 data, allowing it to control unique
color washes on up to fourteen additional fixtures in a chain (set to
DMX mode).
Wash Timer
Wash Offset
NOTE: SLAVE FIXTURES SHOULD BE SET TO DMX MODE AND ASSIGNED
TO CHANNELS FIVE, NINE, THIRTEEN, ETC (IN FOUR CHANNEL
INCREMENTS).