Rosco Miro Cube 4CA, User Manual

Page: 17 / 36

Manual Mode
17
WARNING:
DO NOT CONNECT ANY BRAQ CUBE IN MANUAL
MODE TO ANY OTHER DMX SENDING DEVICE AS CONTENTION
ON THE DMX512 INPUT WILL RESULT.
In Manual Mode, the Braq Cube can be controlled directly from its
rear panel without the need of a DMX console or a DMX control device.
Standalone control capabilities vary according to the factory setting in
use (Four Color and Three Color). Factory settings are password
protected but can be adjusted. Contact the manufacturer for more
information.
(All stand-alone, DMX address and configuration settings are
non-volatile, meaning they will not change if power is lost or switched
off and restored. When set to manual mode the Braq Cube operates
as a DMX Master and is sending DMX512 data.)