51-17568 REV B
16
the camera overlay off. If actuated again when in OFF mode, the overlay appears in the
upper left position, and the cycle starts over.
Each new setting is saved in the flash memory of the microcontroller interface and the
overlay position is retained through power cycles.
Upon power up the camera overlay will display the current mode of operation (e.g.
BIPOLAR). After all settings are displayed the camera overlay will go off.
NOTE:
Even in the OFF mode, the overlay will automatically be activated when the user
enters LLA adjust mode (in the upper left corner). As soon as the new LLA value has been
set, the overlay will be turned off automatically.
Summary of Contents for CE-X-36
Page 15: ...51 17568 REV B 9...
