accomplish these changes. The internal electronics assembly must be temporarily
removed from the housing and changes made. The Mode Selection Board is clearly
accessible so that the switches can be operated easily.
There are two separate DIP switch assemblies on the board labeled S1 and S2. S1
has 8 and S2 has 6 individual switches. The ON position is indicated on each switch
assembly.
A tabulation that follows shows the positions of switches in order to select specific
modes of operation. S1-1 through S1-5 provides control of input control mode
selection. S1-6 and S1-7 provide for video output mode selection and S2-2 through
S2-4 provide microcontroller inputs.
51-17568 REV B
8
Summary of Contents for CE-X-36
Page 15: ...51 17568 REV B 9...
