Ropox Vario 40-306 Series, User Manual, Mounting Instruction

Page: 47 / 78

47
© ROPOX 2014
Fault finding
The nursing table does not move
up or down when operating the
hand control Check if:
Main power connected 230V.
Motor is connected to control box
Hand control is connected to control box
Motor is overloaded
Hand control defect Check if:
The product works with another hand control
By pressing the up or down button,
no movement is achieved, only
clicking sounds is are heard from
control box Plugs are not connected correctly.
Dismount all cables and re-connect.
The nursing table is not
horizontal/level Make a
”
reset
”:
Simultaneously pres & hold ”up” & ”down”
button of hand control. The control box will start to bleep.
Keep pushbutton presed down until control box stops
bleeping (approx 10 sec.)
Waste handling
Used equipment shall be disposed of according to the National law. We recommend to
dismount the product to the greatest extent possible, in a way that most parts can be
reused. Be aware that this product contains electronically components. Example of
groups
this product can be sorted in: metal, plastic, cables, electronics and parts for destruction.
The nursing table may be used at temperatures from 5° to 45°C
The nursing table may be used at a relative humidity between 5% and 85% non-condensing.
Factors affecting storage and transport
i
i