Ropox Maxi 2 50-50670, User Manual

Page: 41 / 69

Side 41
Support
Troubleshooting
The nursing table does not
move up and down when the
hand-control switch is pressed
Check:
6. If 230V has been connected and current is
available.
7. If all plugs have been correctly inserted.
8. If the tale only moves upward, check if the
safety stop has been blocked/activated.
9. Dismount all cables and mount them again.
10. Contact Ropox for support.
Waste
The used equipment must be disposed of in accordance with national law.
We recommend disassembling of the product to the greatest possible
extent, so that most parts may be recycled. Please note that this product
contains electrical components. Examples of sorting groups: Metal, plastic,
cables, electronics and parts for destruction.
The nursing table may be used at temperatures from 5°C to 45°C
The nursing table may be used at a relative humidity between 5% and 85%
non-condensing
Factors affecting the product during storage and transport
i
i