9
TF 200.01.0048_eng
4.
Mounting instruction
4.1 Installation interfaces
Construction
The wall must be made of material suitable for screwing and approved for damp rooms.
Tested in accordance with DS/ISO 17966:2016, max user weight is 520kg/1145lb
Max. load of upper screws: 71kg/156lb / screw.
Minimum areas for reinforcement of wall are the hatched areas.
Power
Recommended positioning of power supply point in wall for optimum and hidden wiring. In case of alternative
location, the cable of the control unit has a length of 3.2 m / 126 in.
Water
The drain is Ø32mm/1,3in and ends with an Ø32x88.5° drain elbow.
Connection of drain and elbow should not protrude more than 90mm/3,5in from the wall owing to the cover
plates.
The water supply ends with two 90° stop valves with
½” outside thread. Location and optimum orientation as
illustrated.
The stop valves should not protrude more than 90mm/3,5in from the wall owing to the cover plates.
We recommend positioning of water and drain installations as illustrated. All hoses for water and drain
installations must be flexible to ensure unhindered movement within the height adjustment range of 71-96
cm / 28-37,8 in (including washbasin).
If another location of water supply and drain is required, the Support Washbasin will be without cover plates.
The drain may also be positioned in the floor, but in that case the cover plates cannot be used.
Right
200mm/7,8in
340mm/13,4in
1
9
3
m
m
/7
,6
in
65mm/2,6in
200mm/7,8in
200mm/7,8in
200mm/7,8in
65mm/2,6in
6
0
0
m
m
/2
3
,6
in
5
3
8
m
m
/2
1
,2
in
6
0
0
m
m
/2
3
,6
in
5
3
8
m
m
/2
1
,2
in
340mm/13,4in
1
9
3
m
m
/7
,6
in
710
-9
6
0
m
m
/2
7
,9
-3
7
,8
in
710
-9
6
0
m
m
/2
7
,9
-3
7
,8
in
Left
Summary of Contents for 40-44016
