Ropox 40-44010, User Manual

Page: 12 / 41

12
TF 200.01.0047_eng
Manual
(40-44014 and 40-44015)
Construction
The wall must be made of a material suited
for screw mounting and approved for damp
rooms.
The hatched area is the minimum area for
reinforcement of the wall.
Reinforcement from floor to ceiling is
advisable.
Load-tested in Accordance with DS/ISO
17966, the maximum user weight has been
fixed at 400kg (881 lbs).
Max tensile load of upper screws
71kg/screw (157 lbs)
The washbasin is supplied with a set of 8
screws and rawlplugs suitable for mounting
on a concrete wall. The fitter should always
consider the material, condition and
strength of the wall and use screws and
rawlplugs suitable for the specific wall type.
Plumbing
The drain is Ø32
(1 ¼”) and ends in an
Ø32x88.5° drain elbow.
The maximum protrusion of drain connection of
elbow from the wall is 90mm
(3 ½”) to allow for
the covers.
The water supply ends in 2 (two) 90° shut-off
valves pointing downward (not included). The
maximum protrusion of the shut-off valves from
the wall is 90mm
(3 ½”) to allow for the covers
It is important that all hoses for water
connection and drain are flexible to allow the
frame to move freely within the height
adjustment range of 710-1010mm
(28” – 39
8/10”) (including washbasin).
If a location of water supply and drain different
from the recommended positioning is required
and if there is a floor drain, the Support
Washbasin will have no covers.
For purchase of adapters for connection to
various standard installations, see ”Connection
Adapters
– Other Washbasins”.
NOTE:
The illustrations show the left-hand
model 40-44014