12
Technical information
Control unit
Type designation
CBJ2, (150/200kg)
Mains voltage
100-240V
Output voltage
24V DC
Max. output current
10,8A
Protection
IP65
Note!
The control units of the 150kg and
200kg walking trainers are not
identical. Therefore the serial
number of the product must be
stated when ordering a new
control unit.
The electrical system is designed for
periodical use with a duty circle of max. 10%
conforming to 1 min. active/ 9 min. pause.
1. Emergency stop
2. Emergency lowering
3. Charging indicator
4. Connected to mains voltage
5. Socket for remote control
6. Socket for lifting motor, output terminal 1
7. Socket for leg spreading motor, output terminal 2
8. Socket for charging, mains cable
The control unit is provided with:
-
Protective motor switch for lifting and leg-spreading, protecting against overloading
-
Short-circuit protection
-
Acoustic signalling device sounding when the battery must be charged
-
Electrical emergency lowering device to be used if the hand control unit does not
work
-
Built-in charger
Battery
Type designation
BAJ1
Output voltage
24V DC, 2.7 Amps.
Protection
IP65
The battery is placed directly on the control unit. When the capacity is approx. 50% the
control unit beeps during operation and the battery must be charged. Charging takes 4
–
5 hours.
Note!
The walking trainer cannot be used during charging.
1
2
3
8
7
6
5
4
