9
Mounting Instructions
Assembly of:
25-20035 Walking Trainer 150kg
25-20526 Walking Trainer 200kg
and
25-20135 Walking trainer unit
Note!
Assembly of 150kg and 200kg Walking
Trainers is identical. The only difference is
the undercarriage.
•
Place the lifting mast in the mast holder on the
undercarriage. Tighten the two screws using the
5mm Insex wrench provided.
•
Insert the cable of the leg spreading motor into
outlet terminal 2, see
”Technical Information”,
page 11.
Assembly of lifting unit and hand support:
•
Brake the rear wheels.
•
Hold the lifting unit (turn it through 90°) so that the locking pin may be pushed into
the corresponding slide rail of the lifting mast.
•
Push in the lifting unit.
•
Now turn it 90° clockwise until a click is heard from the locking screw.
•
Check that the arm has been properly locked.
•
Hook the hand support on to the mast holder.
•
Tighten the tightening handle on the side.
The walking trainer is now ready for use.
Screws
Tightening
handle
Locking screw
