TF 200.01.0016_ENG
23
7.4 Yearly inspection
Preventive service
must
be made once a year. Follow the procedures below must be followed.
- Forms to service report
Take a copy off the forms on page 4 and 5 and use them when filling out the service report. We recommend
to scale them up in A4 size
- Visual inspection
Inspect hoist frame and weldings for wear, skews or any other damage
- Testing
Check all functions with and without load
Check emergency stop
Check battery and charger
- Mechanical inspection, se also section 7.5
Inspect that all parts is moving freely and without any abnormal noise
OBS!
Bolt M6x50 holding Spreader bar should be dismounted and inspected visually
OBS!
Axle holding lifting arm should be dismounted and inspected visually
Inspect that bolts are tight
- Electric inspection, also see also section 7,6
Check actuator for damage, noise and the fixtures
Check the battery voltage with max load and a full lifting cycle. If below 19V the battery needs to be
changed.
Replace defective battery, if any
Check wires for damage
Check all plugs and sockets
