TF 200.01.0016_ENG
12
4.2 Installation of liftig unit and hand support
•
Brake the rear wheels.
•
Hold the lifting unit (turn it through 90°) so that the locking pin may be pushed into the corresponding
slide rail of the lifting mast.
•
Push in the lifting unit.
•
Now turn it 90° clockwise until a click is heard from the locking screw.
•
Check that the arm has been properly locked.
•
Hook the hand support on to the mast holder.
•
Tighten the tightening handle on the side.
The walking trainer is now ready for use.
Tightening
handle
Locking pin
