Controller functions
Page 46
RES-408
Version 1
the „UP“ and „DOWN“ keys simultaneously when the home position is displayed. The keys must be pressed
together for 2seconds minimum.
The following settings are possible:
1.
„Celsius“ (Factory setting)
Temperature indication and value selection in
Celsius (°C).
2.
„Fahrenheit“
Temperature indication and value selection in
Fahrenheit (°F)
Up to controller software revision 105 and/or terminal software revision 102, only Celsius (°C) can be specified on
the controller as the temperature unit.
The degree unit can be changed on the controller without interrupting operation
If you specify temperature indication and value selection in Fahrenheit (°F), the controller still uses
Celsius (°C) internally. Value steps are therefore possible with this function owing to the conversion
from Celsius to Fahrenheit.
HOLD
PREHEAT
SEALHEAT
ENTER
HAND
RESET
ROPEX
T-408
!
!