background image

8

Using rinse and spin

When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may find an extra rinse and spin
is needed.

1.

For an additional rinse, push in the Cycle
Control Knob and turn it clockwise to
RINSE, as shown.

2.

Pull out the Cycle Control Knob. The
washer fills, agitates, drains, and spins.

Using drain and spin

A drain and spin may help shorten drying
time for some heavy fabrics or special-care
items by removing excess water.

1.

Push in the Cycle Control Knob and turn
it clockwise to SPIN, as shown.

2.

Pull out the Cycle Control Knob. The
washer drains, then spins.

RINSE

OFF

RINSE

OFF

RINSE

OFF

OFF

NORMAL

FABRICARE

O P E R A T I N G   Y O U R   W A S H E R

SPIN

OFF

SPIN

OFF

SPIN

OFF

OFF

NORMAL

FABRICARE

Self-cleaning
lint filter

Basket
interior

Self-cleaning lint filter

The lint filter at the bottom of the washer
basket cleans itself. During agitation, wash
and rinse water passes over the filter,
separating the lint from the water. The lint is
then spun away from the filter and out of the
system during the spin part of the cycle.

If your washer drains into a tub, remove

any lint collected in the tub or strainer.

Summary of Contents for RAX6144EN0





























Reviews: