background image

16

ASSISTANCE OR SERVICE

I

F YOU NEED ASSISTANCE OR SERVICE IN CANADA

I

F YOU NEED REPLACEMENT PARTS

If you need to order replacement parts, we 
recommend that you only use FSP

®

factory speci-

fied parts. These parts will fit right and work right,
because they are made to the same exacting 
specifications used to build every new Roper

®

appliance. 

To locate FSP factory specified replacement parts in
your area, call our Consumer Relations Department
or your nearest designated service center.

2. If you need service

*

...

Contact Inglis Limited from anywhere in Canada at 
1-800-807-6777.

1. If the problem is not due to one of the items

listed in “Troubleshooting”

*

...

Contact the dealer from whom you purchased your

appliance, or call the Inglis Limited 
Consumer Relations Department 
toll free, 8:30 a.m. – 6 p.m. (EST), 
at 1-800-461-5681. 

*

When asking for assistance or service, please
provide a detailed description of the problem,
your appliance’s complete model and serial
numbers, and the purchase date. (See the 
“A Note to You” section.) This information 
will help us respond properly to your request.

F

OR FURTHER ASSISTANCE

If you need further assistance, you can write to Inglis
Limited with any questions or concerns at:

Consumer Relations Department
Inglis Limited
1901 Minnesota Court
Mississauga, Ontario L5N 3A7

Please include a daytime phone number in your 
correspondence.

Gearcase assembly
covered by your 
warranty.

Summary of Contents for One speed automatic washer


















Reviews: