Roper Whitney 10M14-H, Operation Manual

Page: 47 / 105

DO
Read, understand, and follow all machine-mounted warning and
instruction plates and signs.
Make sure safety guards, shields, barriers, covers, and protective
devices are in place, connected, and functional before operating the
system.
Visually and functionally inspect all tooling and system components
before operating the equipment. Check for cracks, chips, burrs,
overheating, and other evidence of failure.
Pay attention to the machine process during operation. Unusual
noises or vibrations can indicate problems requiring immediate
attention.
Shut off power to the system when cleaning or servicing the
machine or when guards, shields, or protective devices are removed
or otherwise made inoperable.
Remove debris and grit with a rake or brush - not your hands.
DO NOT
Do not remove, paint over, alter, or deface any machine-mounted
warning and instruction plates and signs.
Do not override the safety features of the equipment.
Do not operate the machine in excess of its rated capacity.
Do not make adjustments, measure workpieces, or remove debris
and grit until the machine has stopped moving and appropriate
safety features are activated.
Do not brake or slow down moving equipment.
Do not use combustible fluids without adequate fire protection
equipment.
6M14 / 10M14 Air-Operated Front Material Return
Page 8
Machine Setup and Operation Safety