INTERNAL DURANT PARAMETERS
EXTRACTING FUNCTION CODES
FROM DURANT CONTROLLER
1. Hit
FUNCTION
ENTER
. Note that all four (4) LED's are flashing.
2. Hit
FUNCTION
5
ENTER
. The display will show the current value for this
function code.
3. Press
ENTER
. The next code number will display briefly and then its value
will remain on screen.
4. Continue pressing
ENTER
until all values are known.
5. Press
START/STOP
to exit.
CHANGING FUNCTION CODES
IN DURANT CONTROLLER
1. Hit
FUNCTION
ENTER
. Note that all four (4) LED's are flashing.
2a. Hit
FUNCTION
(FUNCTION CODE)
ENTER
. Note that all four (4)
LED's are still flashing. If they are not, a password lock has been entered. The
password can be displayed by pressing and holding in
FUNCTION and
0
when power is first turned on.
2b. To enter password, hit
FUNCTION
ENTER
. Enter password and hit
ENTER
. Display should show
00
and all LED's should be flashing.
3. Hit
FUNCTION
(FUNCTION CODE)
ENTER
. Enter new value.
Accept it by pressing
ENTER
.
4. Repeat step three as necessary.
5. Press
START/STOP
to exit.
TO CHANGE CURRENT DISPLAYED POSITION
1. Hit
FUNCTION
ENTER
. Note that all four (4) LED's are flashing.
2. Hit
FUNCTION 65 ENTER.
Input new current position.
3. Hit
ENTER
again.
4. Hit
START/STOP
to exit programming mode.
34
Summary of Contents for 10M14-G
