manualshive.com logo in svg

ROPA KS 475, Translation Of The Original Operating Manual

Share
Download
ROPA KS 475 Translation Of The Original Operating Manual Download Page 64

Operation

Attachment/detachment of the machine

Specific feature of the end tow kit

The illustration shows KS 475

(16)

Right support wheel in road position

(17)

Left support wheel in road position

(18)

Right support wheel holder for field position

(19)

Left support wheel holder for field position

The illustration shows KS 475

(20)

Right support wheel in field position

(21)

Left support wheel in field position

– On the machine with an end tow kit, the support wheels must be moved from the

road position to the field position after the machine has been attached to the trac-

tor. To do it, loosen the safety pins with circlip. The left support wheel must be

moved from the road position (

17

) to the field position (

21

), and the right support

wheel must be moved from the road position (

16

) to the field position (

20

).

– After conversion, secure the support wheels using pin with circlip.

64 / 110

Summary of Contents for KS 475















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands