ROPA KS 475, Translation Of The Original Operating Manual

Page: 63 / 110

Operation
Attachment/detachment of the machine
(14)
Hole lower link arm right
(15)
Hole lower link arm left
– Connect the cardan shaft to the machine.
– Drive the tractor backward and fit the machine correspondingly into both holes for
the lower link arms. Use the balls for the lower link arms and secure them using
both pins with circlip.
– Mount the cardan shaft on the tractor side and secure it with the anti-twist chain.
– Release the support foot using the lower link arms. Then, retract the support foot
completely and secure it using safety pin with circlip. Lower the lower link arms
again until the haulm topper is in a horizontal position.
– Mount the upper link arm with the ball to the tractor. While doing so, mind your next
actions with the machine. Use the lower hole (
13
) for transport, and the upper slot
(
12
) for the working position. Then secure it using pin with circlip.
– Plug in and check the vehicle lighting for the crosswise driving device.
– Check the position of the optional firming wheels. ( See Page 71 )
63 / 110