22
MACHINE OPERATION
Clean the squeegee before starting the work cycle every time.
Do not stand on the squeegee.
Cleaning the squeegee
Check the squeegee daily and clean as necessary.
To clean the squeegee, raise it, disconnect it from the suction hose, loosen the
knobs and remove the squeegee.
Wash the squeegee under clean running water.
MAX
5.0 mm
Water Level
Max. 10
°
Driving the machine
Do not park the machine on slopes or ramps.
Maximum inclination of 10° is only allowed.
Maximum water wading of 5.0 mm is allowed.
The machine is powered by a powerful traction motor.
Starting-
To propel the machine press the accelerator pedal in downward direction.
Stopping-
To stop or slow the machine release the accelerator pedal (Pedal returns to its
initial position). Press the brake pedal to slow or stop the machine.
Proceed to the first driving trials on a clear training ground until the driver is
acquainted with the elements and their functions.
- Before leaving the machine make sure to remove the key.
- Because of skidding hazard drive at reduced speed on wet
grounds and when turning.
- Drive slowly on downhill, turning, wet grounds, ramps
and on uneven surfaces.
- Do not drive the machine in flooded areas. Risk of damaging the
traction motor.
- Never make sharp maneuvers while driving.
- Do not adjust the seat while driving the machine.
Do not modify the machine to transport people or goods.
Do not drive fast with the tanks full of water.
MALFUNCTION
OR
EMERGENCY
X
Do not tamper the traction motor controller.
Risk of damaging the motor.
In case of an emergency or malfunction - switch of key and disconnect
battery plug.
RootsScrub RB 800/950