ROOTS Rhino RD180, Operator'S Manual, Page: 74 / 88

74
Rhino RD180
MAINTENANCE
JACKING THE MACHINE
CLEANING/REPLACING CABIN AIR FILTERS
Always park the machine on a flat dry surface before jacking.
Ensure that the hopper is empty before jacking the machine.
The machine should be jacked up only using its designated jacking points,
failure to do will cause damage/injury to machine or operator.
Use a jack which will support the weight of the machine.
Use jack stands to support the weight of the machine if hoisted up for a
longer period of time.
The front jacking points are at the flat bottom portion of the machine which
can be accessed by opening the broom chamber door.
The rear jacking point is located at the middle of the rear bumper, to access it
remove the rear skirt portion as in fig. Place a suitable jack. Use a jack stand if
required.
Remove the knobs (a), open the filter chamber cover (b), remove the filters
(c). Clean the filters using compressed air. Place the filters back after
cleaning. Clean the filters once a month.
When servicing or changing tyres, block the opposite tyres before
raising the machine.
Front Rear
The cabin air filters must be cleaned/replaced from time to time
to ensure dust free air circulation inside the cabin.
To clean the filter:
a
b
c
Remove the knobs (a), open the filter chamber cover (b), remove the filters
(c). Replace with new filters. Replace filters every 14 months of use.
To clean the filter: