ROOTS RHINO RD 160, Owner Manual & Illustrated Parts List

Page: 54 / 164

54
MAINTENANCE
PREVENTIVE MAINTENANCE
To replace the dust filters
1. Open the hood of the filter chamber using the latch.
2. Operate the toggle clamps to remove the filter holder.
3. Remove the old filter.
4. Replace with a new filter.
5. Secure the new filter by locking the toggle clamps.
Before leaving the machine: park on a level surface, stop engine, engage
parking brake and remove key.
CAUTION: Do not drop the filter down.
BROOMS
Main Broom
Ÿ
The main broom used in the machine is of a cylindrical type and spans the
width of the machine.
Ÿ
The main broom sweeps the debris into the hopper.
Ÿ
Check the main broom everyday for wear or damage.
Ÿ
Remove any wires, ropes or strings from the main broom to avoid damage to
the main broom, drive hub or other drive components.
Ÿ
Adjust the main broom pressure by using the knob on the operators cab.
Ÿ
Replace the broom if worn out/damaged or it no longer sweeps effectively.
1. Park the machine on a flat surface.
2. Engage parking brake.
3. Raise the main broom.
4. Stop the engine.
5. Remove key.
6. Open the left side door of the broom compartment.
To replace the main broom:
When placing the filter back ensure that the filter pocket face upwards.