ROOTS RHINO RD 160, Owner Manual & Illustrated Parts List

Page: 40 / 164

40
MACHINE OPERATION
1. Sit in operator seat, adjust seat posi on (if required) ensure parking brake is
applied, check if the direc on control pedal is in neutral posi on.
2. Thro le should be in idle posi on.
3. Turn the igni on key to GL posi on to ini ate engine pre-hea ng, wait ll the
glow plug lamp goes off, then con nue star ng the engine.
DRIVING THE MACHINE
GL
ON
OFF
NOTE: If the engine does not start after 10 seconds,
release key, wait for 1 minute and repeat the procedure
again.
NOTE: If engine does not start in the first crank, do not continue cranking, open
hood and check for any indication on the ECU panel. Switch off key and try
again. If the problem persists contact an authorized service center.
WARNING: This machine emits toxic gases. Severe
respiratory damage can be caused. Provide
sufficient ventilation.
Idle engine speed
Star ng: ECU Panel
4. Thro le should be in normal sweep posi on.
Medium engine speed