ROOTS RHINO RD 160, Owner Manual & Illustrated Parts List

Page: 33 / 164

33
MACHINE OPERATION
The parking brake is used to hold the vehicle sta onary when being parked
a er use. The parking brake lever is located below the steering column towards
the le hand side. The vacuum by-pass switch is used to ac vate the by-pass feature of the sweep
mechanism to prevent any fluids entering the filters, which may cause damage.
The filter shaker switch is used to ac vate the vibrator motors to shake off fine
dust which are held within the filter, this feature improves the filtra on
capacity of the filters. Shu ng the vacuum by-pass during shaking improves
the cleaning effec veness.
Switch posi on up: Vacuum by-pass On
Switch posi on neutral: Vacuum by-pass Off
Switch posi on down: Filter shaker On
13. Parking Brake Lever: 14. Vacuum By-Pass/Filter Vibrator Switch:
To Set: Pull the parking brake lever up.
To Release: Push the parking brake lever down.
CONTROLLING AND INDICATING ELEMENTS
Note: Parking brake is intended for use only a er the machine has come to a
complete stop. Do not use it on a moving machine unless it is an emergency.