ROOTS BT4545, Owner'S Manual, Page: 12 / 24

12
RootsScrub BT Series
0016:10
0016:10
0016:10
DISPLAY LAYOUT OF LCD
1 . On Power up-
Shows the software version (V5.4) &
set battery type when switched On (while booting)
2 . On Start Up-
On start up it displays the total
previously run hours of the machine-Format -
hhhh:mm and battery voltage tower.
3 . Brush Motor ON-
A brush symbol is displayed when
the brush motor is switched ON.
4 . Suction Turbine ON-
A turbine symbol is displayed
when the suction turbine is switched On.
00 16:10
5 . Brush Motor & Suction Turbine OFF- The brush
motor shuts down immediately when switch “B”
is pressed but when switch “C” is pressed the
suction turbine shuts down after a delay of 15
seconds.
0016:10
BATTERY CHARGING
6 . The brush motor & suction turbine icons will start
flashing just before the battery cut off level.
0016:10
8 . Fully discharged condition.
9. On Battery Charging- Displays that the battery is in
charging mode. After the battery is fully charged a
“BATTERY FULL” icon will be displayed.
This is
applicable only for on-board charger equipped machine.
10 . Sleep Mode - If the machine is left idle for 15 minutes
after being switched on the machine will go into a sleep
mode, i.e, the display switches off. To power up again
simply switch off the main switch and switch it on
again. This is a power saving feature.
V5.4 LA
FIRST OPERATION
0016:10
7 . Solenoid valve ON-
A tap symbol is displayed when
the s
olenoid valve
is switched ON.