ROOTECH ACCURA 3500S, User Manual

Page: 19 / 76

Page 19
Parameters
Item Real-time 1 Average 2 Total 3 Maximum 4 Minimum 5
Phase voltage
■ ■ ■
■
†
Line to line voltage
■ ■ ■
■
†
Current
■ ■ ■
Power Active
■ ■ ■
Reactive
■
†
■
■
†
Apparent
■
†
■
†
■
†
Energy
6
Active
■
Reactive
■
†
Apparent
■
†
Frequency
■
Power factor
■
†
■
THD Voltage
■
Current
■
Demand Power
■ ■
Current
■ ■
†
It is available only via RS485 communication.
1
Instaneous value of each parameter
2
Average value of three phase parameters.
3
Total value of three phase
parameters.
4
If a
real-time value is greater than the maximum value, the maximum value is updated.(The value
measured within 10 msecs after power up is ignored.)
5
If If a real-time
value is smaller than the minimum value, the minimum value is updated. (The value
measured within 10 msecs after power up is ignored.)
6 Energy values are periodically stored to non-volatile memory.
Note
The Maximums and minimums will not be updated with no power-up.
Measurement data are not shown for 5 seconds after power-up.