h.
g.
f.
ASSEMBLY INSTRUCTIONS continued
4
3a - Gas model
- Remove foot
pedal (f) from holder. Place foot
pedal on flat surface near the
hose guide/guard on either side
of roller, making sure cable is
not twisted or kinked.
3b
-
Electric models
- Foot
pedal (g) is stored in holder
within frame. Take out pedal
and place on flat surface near the
hose guide/guard on either side
of roller, making sure the hose is
not kinked.
On 110 volt AC, the end of
the tubing opposite the foot
pedal can now be connected
by pushing it into the barbed
receptor (h) on the box mounted
on the motor of the 110 volt
motor.
