POSITIONING & ROLLING HOSE
8
8
-
Apply pressure to foot
control holding hose with
both hands allowing it to slide
through hands, while guiding
the hose onto the mandrel.
9
-
Allow the first few coils to
roll on loosely, and the balance
to roll tightly. This will allow
easy removal of the completed
roll.
10
-
Controlling the speed
of the rolling process, with
foot control, will prevent risk
of injury to the operator, as
the female end of the hose
approaches.
11
-
To stop the rolling process-
Remove foot pressure on pedal
and/or turn power switch to off
position. Disconnect electric
units from power source.
12
-
On gas engine models turn
fuel valve lever to off position
to prevent fuel leakage when
moving hose roller.
