RooDog Avatar, User Manual

Page: 7 / 24

www. roodog .co.uk | 7
Battery Charging & Removal
Step 1.
Put the silver key in and turn 90 degrees to the right and hold in
that position. Lift up bottom part of the cover until it releases.
Step 3.
Once the cover is removed, undo the Velcro strap then lift up the
top half of the battery about halfway (enough so you can grab
hold of it) Then slide the battery up towards the handlebars. It
should release from the connection point allowing you to then
lift the battery out.
Step 2.
Place hand at the top of the cover & whilst lifting the bottom up
in the air, slide THE COVER down towards the floor.
TIP: LUBRICATE
AROUND TOP HALF OF COVER AND BIKE FRAME TO MAKE RELEASE EASIER.
Step 4.
At the bottom of the battery is a connection lead that connects
the battery to the charge point on the side of the bike. If this
is CONNECTED you will have to remove it prior to lift out the
battery. (this is also where you charge the battery when battery
is removed)