Ronix RH-9150T, Quick Start Manual

Page: 9 / 11

LASER DISTANCE METER
8
on screen.
.
INDIRECTLY HEIGHT I, II & III MEASUREMENT (BASE ON
PYTHAGOREAN)
1) Click thrice, four and five times to enable Indirectly Measurement.
2) Laser will be activated when entering indirectly measurement
mode.
3) Follow the instructions on main screen to measure the LENGTH
OF HYPOTENUSE(S) and BASE.
4) After finish all the instructions, the result [HEIGHT] will be showed
on screen.
Indirect measure I
Indirect measure II
Indirect measure III
ERROR CODE
Code Description Solution
Error 01 Out of measuring range Measuring in a prop-
er range
Error 02 Reflected signal is too
weak
Select a better
surface
Error 03 Out of display range
(Max Value: 99999),
e.g.: result of area or di-
mension is out of display
range
Divide calculation
into intermediate
steps
Error 04 Pythagorean calculation
error Check and verify
values and steps are
correct
Error 06 Out of working tempera-
ture
Measure in an
environment within
specified working
temperature
Error 07 Ambient light is too
strong Measure in a darker
place (Shadow
target)