Ronix RC-5010, User Manual

Page: 9 / 21

USER MANUAL
9
7
- Make sure the hose is free of obstructions or sangers.
- Entangled or snarled hoses can cause loss of balance or footing
and may become damaged.
- Use the air compressor only for its intended use. Do not alter
or modify the unit from the original design or function.
- Always be aware that misuse and improper handling of this
product can cause injury to yourself and others.
- Never leave a tool unattended with the air hose attached.
- Never point any air tool toward yourself or others.
- Do not operate this air compressor if it does not contain a legible
warning label.
- Do not continue to use a tool or hose that leaks air or does not
function properly.
- Always disconnect the air supply and power supply before
making adjustments, servicing a product, or when a product is
not in use.
- Your tool may require more air consumption than this air com -
pressor is capable providing.
- Always follow all safety rules recommended by the manufacturer
of your air tool, in addition to all safety rules for the air compressor.
Following this rule will reduce the risk of serious personal injury.
- Never direct a jet of compressed air toward people or animals.
Take care not to blow dust and dirt towards yourself or others.
Flowing this rule will reduce the risk of serious injury.
- Do not use this air compressor to spray chemicals.
- Your lungs can be necessary in dusty environments or when
spraying paint. Do not carry while painting.
- Never use an electrical adaptor with this grounded plug.
- Check damaged parts. Before further use of the air compressor
or air tool, a guard or other part that is damaged should be carefully
checked to determine that it will operate properly and perform its
intended function. Check for alignment of moving parts, binding
of moving parts, breakage of parts, mountings and any other con-
ditions that may affect, its operation. A guard or other part that is
damaged should be properly repaired or replaced by an authorized
service center.