USER MANUAL
19
17
.
BEARING LUBRICATION
All of the bearings in this product are lubricated with a sufficient
amount of high grade lubricant for the life of the unit under normal
operating conditions. Therefore, no further lubrication is required.
.
REPLAING THE AIR FILTER
1) Turn the air filter cover counterclockwise approximately one-
quarter turn.
2) Remove the cover
3) Remove the air filter.
4) Install new air filter.
5) Replace the air filter cover and secure it by turning it clockwise.
.
CHANGING THE OIL
Replace the oil after the first 10 hours of operation and every
100 hours following the oil change.
The sight glass, located above the tank, indicates the oil level
and lets the operator see at a glance if oil should be added.
1) Place as suitable container underneath the drain to collect
used oil.
2) Remove the drain plug with an 8 mm socket or wrench.
3) When the used oil has drained, reinstall the drain plug and
tighten with the wrench.
4) Unscrew the cap of oil fill hole.
5) To refill, use a funnel to pour oil into the hole. Refill only with
synthetic oil fil SAE 5W40.
Summary of Contents for RC-5010
Page 1: ...AIR COMPRESSOR 50LITER RC 5010...
Page 2: ......
