USER MANUAL
3
must wear it if necessary.
3) Never use any power source but compressed air.
As this tool is designed and manufactured to operate using air
pressure that is generated by an air compressor authorized by a safety
certification authority, you cannot use any kind of gas combustible
gases such as oxygen and acetylene except this. Otherwise, it may
not only cause mechanical trouble but also malfunction or explosion,
resulting in infliction of fatal injury on a user or those around him or her.
4) Use it within the optimum range of air pressure.
This tool is designed to operate within a range of pressure between
58 psi and 100 psi (or between 4 bar and 7 bar). Connect this tool to a
pressure controllable device so that you can work under fixed pressure.
When operating this tool, never use it under pressure of 120psi (8bar)
and over. This tool can not connected to pressure higher than 120psi(or
8 bar), or will damage the parts.
5) Don’t use it near inflammables (combustibles).
Never operate this tool near inflammables (such as thinner and
gasoline). Combustible gas from such materials can be sucked into
a compressor and compressed together with air, possibly resulting in
explosion.
6) Be careful not to aim or fire it toward yourself or any other person in
any case.
You should be careful not to aim it toward yourself or any other person
in any case whether the tool is loaded with fasteners or not. Then, even
if malfunction or undesired firing occurs, you can minimize damage
caused by the fired fasteners. Otherwise, it may result in serious injury.
7) Never touch the trigger except when this tool operates for work.
Never touch the trigger except when air is connected to this tool,
which operates for work. It is especially very dangerous to change the
position or move around during operation with your finger fixed
on the trigger, and you may not do any similar action. Otherwise
possible carelessness may result in infliction of serious injury on a
user or those around him or her.
